How to enable task offloading
2 posters
Page 1 of 1
Re: How to enable task offloading
You can check the Adapter Info dialog to see if it does help to disable or uninstall certain adapters.
(see previous post)
Switch to your Adapter numer and check settings for Offload checksum / LSO / RSC...
Hint: Offload RSC is switched off for many people, because it seems that only a few, expensive network cards support it.
(see previous post)
Switch to your Adapter numer and check settings for Offload checksum / LSO / RSC...
Hint: Offload RSC is switched off for many people, because it seems that only a few, expensive network cards support it.
cFos Support- cFos Admin
- Anzahl der Beiträge : 176
Anmeldedatum : 2017-06-07
Re: How to enable task offloading
Hi,
if you check the settings URL http://localhost:1487/cfosspeed/adapterinfo.htm you can see the offload settings for your system.
Did also already read this page?
https://www.cfos.de/en/cfosspeed/documentation/task-offloading.htm
if you check the settings URL http://localhost:1487/cfosspeed/adapterinfo.htm you can see the offload settings for your system.
Did also already read this page?
https://www.cfos.de/en/cfosspeed/documentation/task-offloading.htm
cFos Support- cFos Admin
- Anzahl der Beiträge : 176
Anmeldedatum : 2017-06-07
Re: How to enable task offloading
Our developers will have a closer look on this post.
cFos Support- cFos Admin
- Anzahl der Beiträge : 176
Anmeldedatum : 2017-06-07
How to enable task offloading
Hello,
I have seen in the documentation that I would need to disable Virtualbox adapters and anti virus adapters. I have a Virtualbox that I would need to disable, but I also have a Firewall adapter from my antivirus/firewall software. Do I need to disable that one also in order to get it to work?
I would not like to disable my firewall adapter and I am wondering of real advantages of task offloading.
Current shaper settings (v11.02.2436):
maxtxraw=7301K maxtxacked=7298K maxrx=37.7M avg_time=4000
mindelay=2719 variance=2448 vari_fixed=0
reg_id=3 method=adaptive ( pinger=udp_um3
voltxraw=27.91G voltxacked=5486M volrx=539G time_used=14d 9h
maxiplen=1500 rx_limit=inf tx_limit=inf inhibit_bridged=0
ping_cnt=271005 pong_cnt=268898 (99.2%) burst_cnt=3
adapter=LAN link speed: rx=125M tx=125M
txspeed=134.2M fixed=0 tx_bounce_cnt=5 calibrated=75
tx delay=10000-17448 rx delay=20000-27448 delay_auto=1
Thanks for the help
I have seen in the documentation that I would need to disable Virtualbox adapters and anti virus adapters. I have a Virtualbox that I would need to disable, but I also have a Firewall adapter from my antivirus/firewall software. Do I need to disable that one also in order to get it to work?
I would not like to disable my firewall adapter and I am wondering of real advantages of task offloading.
Current shaper settings (v11.02.2436):
maxtxraw=7301K maxtxacked=7298K maxrx=37.7M avg_time=4000
mindelay=2719 variance=2448 vari_fixed=0
reg_id=3 method=adaptive ( pinger=udp_um3
voltxraw=27.91G voltxacked=5486M volrx=539G time_used=14d 9h
maxiplen=1500 rx_limit=inf tx_limit=inf inhibit_bridged=0
ping_cnt=271005 pong_cnt=268898 (99.2%) burst_cnt=3
adapter=LAN link speed: rx=125M tx=125M
txspeed=134.2M fixed=0 tx_bounce_cnt=5 calibrated=75
tx delay=10000-17448 rx delay=20000-27448 delay_auto=1
Thanks for the help
RamboNTanga- Newbies
- Anzahl der Beiträge : 37
Anmeldedatum : 2019-11-20
Page 1 of 1
Permissions in this forum:
You can reply to topics in this forum
|
|