need help to calibrate
Page 1 of 1
Re: need help to calibrate
C:\Program Files\cFosSpeed>spd speed
Current shaper settings (v10.50.2338):
maxtxraw=2016K maxtxacked=2016K maxrx=263.1K avg_time=4000
mindelay=814 variance=1436 vari_fixed=0
reg_id=3 method=adaptive (Cool pinger=udp_km3 mtu_limit=65535 (65535)
voltxraw=90.71M voltxacked=25.22M volrx=3910K time_used=3m 30s
maxiplen=1500 rx_limit=inf tx_limit=inf inhibit_bridged=0
ping_cnt=230 pong_cnt=225 (97.8%) burst_cnt=0
adapter=LAN link speed: rx=125M tx=125M
txspeed=134.2M fixed=0 tx_bounce_cnt=5 calibrated=69
tx delay=10000-16436 rx delay=20000-21436 delay_auto=1
spd set maxtxraw 2016k
spd set maxtxacked 2016k
spd set maxrx 263k
spd set txspeed 1989k
spd set tx_bounce_cnt=5
Hope this helps
Current shaper settings (v10.50.2338):
maxtxraw=2016K maxtxacked=2016K maxrx=263.1K avg_time=4000
mindelay=814 variance=1436 vari_fixed=0
reg_id=3 method=adaptive (Cool pinger=udp_km3 mtu_limit=65535 (65535)
voltxraw=90.71M voltxacked=25.22M volrx=3910K time_used=3m 30s
maxiplen=1500 rx_limit=inf tx_limit=inf inhibit_bridged=0
ping_cnt=230 pong_cnt=225 (97.8%) burst_cnt=0
adapter=LAN link speed: rx=125M tx=125M
txspeed=134.2M fixed=0 tx_bounce_cnt=5 calibrated=69
tx delay=10000-16436 rx delay=20000-21436 delay_auto=1
spd set maxtxraw 2016k
spd set maxtxacked 2016k
spd set maxrx 263k
spd set txspeed 1989k
spd set tx_bounce_cnt=5
Hope this helps
Dudit- Newbies
- Anzahl der Beiträge : 3
Anmeldedatum : 2020-04-26
Dudit likes this post
need help to calibrate
C:\Program Files\cFosSpeed>spd speed
Current shaper settings (v10.50.2338):
maxtxraw=2016K maxtxacked=2016K maxrx=263.1K avg_time=4000
mindelay=814 variance=1436 vari_fixed=0
reg_id=3 method=adaptive ( pinger=udp_km3 mtu_limit=65535 (65535)
voltxraw=90.71M voltxacked=25.22M volrx=3910K time_used=3m 30s
maxiplen=1500 rx_limit=inf tx_limit=inf inhibit_bridged=0
ping_cnt=230 pong_cnt=225 (97.8%) burst_cnt=0
adapter=LAN link speed: rx=125M tx=125M
txspeed=134.2M fixed=0 tx_bounce_cnt=5 calibrated=69
tx delay=10000-16436 rx delay=20000-21436 delay_auto=1
when i change settings like this my upload speed down 100mb/s to 3mb/s
spd set maxtxraw 287k
spd set maxtxacked 286k
spd set maxrx 1195k
spd set txspeed 280k
spd set tx_bounce_cnt=5
Current shaper settings (v10.50.2338):
maxtxraw=2016K maxtxacked=2016K maxrx=263.1K avg_time=4000
mindelay=814 variance=1436 vari_fixed=0
reg_id=3 method=adaptive ( pinger=udp_km3 mtu_limit=65535 (65535)
voltxraw=90.71M voltxacked=25.22M volrx=3910K time_used=3m 30s
maxiplen=1500 rx_limit=inf tx_limit=inf inhibit_bridged=0
ping_cnt=230 pong_cnt=225 (97.8%) burst_cnt=0
adapter=LAN link speed: rx=125M tx=125M
txspeed=134.2M fixed=0 tx_bounce_cnt=5 calibrated=69
tx delay=10000-16436 rx delay=20000-21436 delay_auto=1
when i change settings like this my upload speed down 100mb/s to 3mb/s
spd set maxtxraw 287k
spd set maxtxacked 286k
spd set maxrx 1195k
spd set txspeed 280k
spd set tx_bounce_cnt=5
sk4znt- Guest
Similar topics
» Calibration 0% after 4+GB download
» Fail to calibrate cFosSpeed with FIBER connections
» Need a guide to properly calibrate the connection with fiber connections via ethernet. Calibration at 0%
» Fail to calibrate cFosSpeed with FIBER connections
» Need a guide to properly calibrate the connection with fiber connections via ethernet. Calibration at 0%
Page 1 of 1
Permissions in this forum:
You can reply to topics in this forum
|
|